Party Light & Sound PARTY-BOX410 Manuel D'utilisation page 5

EN
Problem
No sound when power is
turned on
Distorted sound
No sound from Karaoke
No sound from MP3 source
Specifications
Speakers .............................................................................................................................2 x (2x 10"/25cm)
Tweeters ....................................................................................................................................... 2x 1.5"/3cm
Max. power ............................................................................................................................................ 850W
BT transmission band ............................................................................................................. 2402-2480MHz
BT max. RF emission power .............................................................................................................. 1.92dBm
Power supply ................................................................................................................... 100-240V~ 50/60Hz
Consumption ............................................................................................................................................ 80W
Dimensions ........................................................................................................... 2 x (280 x 355 x 1000mm)
Weight (pair) ........................................................................................................................................ 31.7kg
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authori-
ties or your dealer about the way to proceed.
Possible cause
1. The power cord is not connected
2. Faulty mains outlet
3. No input source
4. Volume set to minimum
1. Master volume is set too high
2. Damaged speaker
1. Microphone plug is not firmly
inserted
2. The microphone is not switched on
3. Microphone volume set to the
minimum
1. Un supported file format
2. Illegal copy
3. USB/TF source not properly in-
serted
Solution
1. Connect the power cord
2. Use an outlet that receives power
3. Connect an input source
4. Set the volume to an appropriate level
1. Reduce the volume
2. Check if the speaker is damaged
1. Insert the mic firmly into the socket
2. Switch the microphone on
3. Increase the microphone volume
1. Change into MP3 format
3. Insert the USB/TF source properly
5