Autotune; Listening To Fm; Changing Stations; Changing The Information Shown On-Screen - PURE Siesta i-Dock Manuel De L'utilisateur

Autotune

If you lose a station signal, or wish to update your station list, you can perform an Autotune
to retune all DAB stations. Press Menu, then select 'Autotune'.

Listening to FM

Changing stations

When listening to FM there are two tuning modes, Manual and Seek (default):
Manual Pressing + or − tunes up or down in steps of 0.05 MHz
Seek Pressing + or − scans to the next/previous station.
By default, Siesta iDock is set to Seek.
To change the tuning mode, press Menu when listening to FM and select 'FM tuning mode'.

Changing the information shown on-screen

Siesta iDock can display different information relating to the FM station you are listening to.
To change the information shown:
1. Press Menu and select 'Display'.
2. Use the + and − keys to cycle through the following options (stations with RDS only):
Radio Text
Date

FM Stereo mode

Select Stereo (default) or Mono signal mode − Mono may improve audio clarity where stereo
signals are weak.
To switch between FM Stereo and Mono modes, Press Menu and select 'FM stereo mode'.
− +
Scrolling text and information broadcast by the station.
The current date.
EN
5