Publicité
Les langues disponibles
Les langues disponibles
The following may trigger a false motion alert:
• Direct sunlight hitting your sensor.
• Having a window in view (movement
outside a window).
• Having a heating or cooling source right
next to the sensor (such as a heating/
cooling vent or a poorly insulated
window that lets hot/cool drafts in).
Fix it in place (optional)
3
If you'd like to check the signal before
fixing your sensor in place, you can do this
in the app or online dashboard under
Manage devices.
When fixing the sensor in place, ensure
there is enough space above to slide open
the case for future battery replacement.
Using the adhesive strips:
• Peel strips from the backing paper
and stick to either the back or the
angled sides of the sensor depending
on where you're attaching it.
• Wipe the area on the surface where the
adhesive strips will be attached and
make sure it's dry.
• Remove the backing from the adhesive
strips so that you can firmly place the
sensor on the surface.
Remember: Removing the provided adhesive
strips from wallpaper or paint can leave marks on
the wall.
Publicité
