Hive Motion Sensor Mode D'emploi page 4

Choose a location
2
Find a place that has a good view of the
area you want to monitor as long as it's near
enough to your Hive Hub or signal booster
to stay connected.
• Aim for around 6-10 ft from the floor as
any higher may leave blind spots below.
• Alternatively, you can rest the sensor on
its side on a table or shelf, then you may
not need to fix it to the surface.
• Your sensor can detect motion up
to 16ft away and has a 94° field of view
when vertical.
Remember: Pets can trigger your motion sensor.
If you don't want this to happen try placing the
sensor where pets won't be seen.