Using Picoscope 6 Automotive For The First Time; Software Updates And Replacement; Documentation; Technical Support - pico Technology PicoScope 4225 Guide De Démarrage Rapide

PicoScope 4225 and 4425 Automotive Scopes
Connections
±200V ±30V
A B
Ch A - B
pk max
Sampling LED
Channel LEDs
PicoScope 4225 front panel
Ground terminal
PicoScope 4000 Series rear panel
Front panel indicators
The sampling LED will be red when scope is connected but not operating. It will
flash green when the scope is sampling data.
When in normal operating mode the channel LEDs on the front panel of the scope
are off.
Ground terminal
It may be on occasion that a computer power supply interferes with the oscilloscope,
causing noise on the trace or a BNC shell voltage overrange indication. Connection
of the rear panel ground terminal to earth or the chassis ground of the vehicle
under test will resolve this problem.
SuperSpeed USB
The SuperSpeed USB 3.1 port allows fast data transfer and is compatible with USB
2.0.
1.7

Using PicoScope 6 Automotive for the first time

1. Run PicoScope 6 Automotive from the Windows Start menu or Windows
desktop.
2. To test your oscilloscope, connect a probe or test lead to channel A.
Touching the tip of the probe should result in a small 50 Hz or 60 Hz signal
showing in the PicoScope window.
3. Choose your test from the Automotive menu. All the instructions you need
will be displayed in a help page.
4
±200V ±30V
A B C
Ch A - D
pk max
Channel LEDs Sampling LED
PicoScope 4425 front panel
SuperSpeed USB 3.1 Gen 1 port
1.8

Software updates and replacement

The latest versions of all Pico software can be downloaded free of charge at:
D
If you require a new software disk, please contact Pico Technology or your distributor.
1.9

Documentation

Additional documentation for Automotive Oscilloscopes and all other Pico Technology
products is available on the software disk, or can be downloaded from:
www.picoauto.com/library/documentation
1.10

Technical support

Regularly updated technical support information can be found at the Pico Technology
technical support website and users' forum here:
1.11

Warranty and returns

Pico Technology 4225 and 4425 automotive oscilloscopes are supplied with a
two-year return-to-manufacturer warranty.
www.picoauto.com/downloads
www.picoauto.com/support
Quick Start Guide
DO239-4