Newteck Purificateur d'air avec un anion Mode D'emploi page 25

ASSEMBLY
The air cleaner assembly is quick and easy. First mount the wheels. Place the
appliance on a flat surface and install the wheels on the base. NOTE: the rear
wheels include a braking or locking system.
For the water tank, open the door and fill the tank with water up to the MAX
level. Do not add more water than indicated. The water level should be between
MIN and MAX.
Using the appliance
- ON/OFF: Press the button once to turn the appliance on and press it again
to turn it off.
- Velocidad (Speed): press the button to change the speed from low to medium
and high.
- Modo (Mode): press the button to choose between normal, natural and sleep.
- Oscilación (Oscillation): press the button and the air will oscillate horizontally.
A light will come on to indicate that this option is activated.
- Aniones (Anions): press this button to start up the anion generator. A light will
come on to indicate that this option is activated. To cancel, press the button
again.
- Tiempo (Time): up to 8 hours of programming. Each time the button is
pressed, 1 hour is added.
- Frío/humidificador (Cold/humidifier): press this button and cool air will be
expelled. If you have placed the ice block in the tank, the air temperature will
drop by up to 3ºC. To cancel, press the button again.
- Calor (Heat): press the button to activate this function. There are two heat
levels: 1000W and 2000W.
25