AVer VC520 Pro Mode D'emploi page 9

Using AVer IP Finder to find the Camera
To find the IP address of your cameras, you can use the AVer IP Finder application. Follow the below
steps to find the IP address of camera.
Download the IP Finder from
1. Run the IP Finder.
2. Click "Search", and all available devices will be listed on the screen.
3. Select a camera from the list. The corresponding fields of IP address will display.
4. To change the IP address of camera, select "DHCP" or "Static IP".
The DHCP should get the IP address from local dynamic IP sever. The static IP, user can enter the
specific IP address. Click "Apply" to apply the setting to the camera. The login password is
required (default password is aver4321; same as web access password).
5. Click "Search" button to re-scan the camera.
6. Double-click on the IP address of camera from the list can connect to camera through the browser.
[Note] If IP Finder cannot find the camera, please check following:
 Please make sure the Ethernet connection of camera is well connected.
 The camera and PC (IP Finder) are in the same LAN segment.
http://www.aver.com/download-center
English-7
.