Using The Device; Cleaning And Maintenance - Lumme LU-705 Notice D'utilisation

 Be careful when using the heater near children.
 Make sure that there is enough space for proper operation of the heater: at least 1 m in front and 50 cm behind the heater.
 Do not let animals or children touch or play with the fan heater. Pay attention! The air outlet gets hot during operation (more than 80°С).
 Keep the fan heater clean. Do not allow any objects to enter any ventilation or exhaust opening as this may cause electric shock, or fire or damage to the heater. Always use the heater in
the upright position.
 Do not use the appliance in rooms less than 4m² area.
CAUTION: Do not cover the appliance when it is in use. If covered, there is risk of overheating.

USING THE DEVICE

 Insert the plug to the power supply.
 Set the mode control according to your wish:
o Ventilation mode: turn the knob to setting «
o Heating at reduced power: turn the knob (right) to setting «I»（1000W）
o Heating at full power: turn the knob (right) to setting «II» (2000W)
 Switching off: turn the knob to setting «O»
SAFETY SYSTEM
 To avoid damage of internal components, the fan heater has a safety device which will automatically switch off the appliance in case of accidental overheating. If this happens the heating
element will turn off, but the fan will continue to run to help cool the heater. If overheating occurs:
o Turn the mode control switch to "O" position and remove the plug from the socket.
o Let the fan heater cool down for a few minutes before you start it again.
o Remove the cause of overheating.
o Plug in the appliance and switch it on. If the appliance can't operate normally, remove the plug from the socket immediately and have the fan checked in the service center.

CLEANING AND MAINTENANCE

 Switch off the appliance and unplug it from the power supply and allow cooling down.
 Switch off the appliance and unplug it from the power supply and allow cooling down. Wipe the outside of the appliance with a soft damp cloth. Clean the air inlet/outlet grilles regularly.
SPECIFICATION
Model Power supply
LU-705 220-240 V, 50 Hz
WARRANTY DOES NOT COVER SUPPLIES (filters, ceramic and non-stick coating, rubber seals, etc.)
Production date is available in the serial number located on the identification sticker on the gift box and/or on sticker on the device. The serial number consists of 13 characters, the 4th and 5th characters
indicate the month, the 6th and 7th indicate the year of device production.
Producer may change the complete set, appearance, country of manufacture, warranty and technical characteristics of the model without notice. Please check when purchasing device.
»
Power Net weight / Gross weight
2000 W 0,9 kg / 1,1 kg
Producer:
Package size (L х W х H)
Ningbo Dongji Electronic Technology Co., Ltd
No.2 Weiyi Rd, Fanshi town, Сixi, Ningbo, China
224 mm x 135 mm x 267 mm
Made in China
5