Mount The Shearing Head Of The Favorita Hybrid; Mount The Shearing Head Of The Fav5 Hybrid - Aesculap Suhl Favorita Hybrid Mode D'emploi

4.1.2 Mount the shearing head of the
Favorita Hybrid
Risk of injury caused by sharp cut-
ting plates!
Handle the shearing head of the
clipping machine with appropri-
WARNING
ate caution.
Note
The shearing head for clipping machine Favorita Hybrid
is not included in the scope of delivery.
Slide On/Off switch 5 upward to switch on clipping
machine Favorita machine 3.
Push lever 2 towards the shell of the product.
Mount the shearing head on shearing adapter1.
Release lever 2.
This completes the mounting of the shearing head.
4.1.3 Mount the shearing head of the FAV5
Hybrid
Risk of injury caused by sharp cut-
ting plates!
Handle the shearing head of the
WARNING clipping machine with appropri-
ate caution.
Note
The shearing head GT330 #10 (USA+UK) for clipping
machine FAV5 Hybrid is included in the scope of deliv-
ery. Various shearing heads are available for different
applications
If the knife hinge is closed: Open knife hinge 13
with a screwdriver, see Fig. 1.
13
Fig. 1
Install shearing head 14 on open knife hinge 13,
see Fig. 2.
14
Fig. 2
Press ON/OFF switch 5.
Gently push shearing head 14 towards clipping
machine FAV5 Hybrid, see Fig. 2.
The shearing head 14 engages with an audible
click.
Check that shearing head 14 is correctly seated on
clipping machine FAV5 Hybrid.
13
5