Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
•
The wet vacuum cleaner off.
•
Unplug the unit from the electrical supply.
•
Rinse the bucket with clean water.
•
Clean the entire unit with a damp cloth.
•
The unit may never be cleaned with means of a high pressure cleaner.
•
Only use original spare parts and accessories when reparing the unit.
•
Repairs may only be made by authorised specialists who have full training on the maintenance of the wet
vacuum cleaner.
With careful treatment wet vacuum cleaners will long remain functional.
Before working on the wet vacuum cleaner disconnect mains cable!
Only do repairs and service that are mentioned in these operating instructions.
Leave service and repairs, especially repairs on electrical componants, the after sales service of an author-
ised service agent.
The following advise will help you detect faults and help you resolve them:
Disturbance
Machine does not work
Insufficient vacuuming performance
Should the vacuum cleaner not work after checking above faults, please contact authorised service agent.
Should the machine not be used it should be placed at a dry spot under normal conditions and never und 0°C.
The packaging materials are recyclable. Please do not throw the packaging into the household
waste, but recycle it.
Old devices contain valuable recyclable materials which should be recycled. Batteries, oil and
similar materials must not be discharged into the environment. For this reason, please dispose
of old devices via suitable collection systems.
Finishing the clean job / Maintenance
Interference / Troubleshooting
Reason
Connections not plugged-in
Suction hose (a), suction pipe (c) or
water suction nozzle (k) blocked
Motor cover (8) not placed properly
Storage
Environmental protection
Removal
Check connections
Eliminate blockage
Fit motor cover (8) properly
5 | EN
Publicité
Table des Matières
