General Guidelines - Perel ABC16AN Mode D'emploi

3. General Guidelines

Refer to the Velleman
of this manual.
4. Features
 for all vehicles 12 V ~ 24 V
with petrol engine (max. 2500 cc) (ABC16AN/ABC16ALN)
o
with petrol (max. 5500 cc) or diesel engine (max. 3000 cc) (ABC25AN)
o
 fully insulated full contact safety clamps
 copper-aluminium technology
 TÜV/GS approved, complies with DIN 72553:1994
 supplied in re-useable storage bag
 corresponds with the conductance of a traditional 16 mm² / 25 mm²
copper jumper cable
 LED-lighted clamps (ABC16ALN only)
5. Operation
5.1 Vehicle with Grounded Negative Post
1. Connect the positive cable (+, red) to the positive terminal of the
discharged battery.
2. Connect the other end to the positive terminal of the booster battery.
3. Connect the negative cable (-, black) to the negative terminal of the
booster battery.
4. Connect the other end to the engine block of the stalled vehicle, away
from the battery. Stand back and do not connect to the negative post!
5. Start the booster vehicle and then the stalled vehicle.
6. Disconnect the cables in reverse order. Keep both running for a few
minutes.
V. 02 – 17/04/2015
ABC16AN/ABC25AN/ABC16ALN
® Service and Quality Warranty on the last pages
4 ©Velleman nv