Changing Over Doors Hinges - Aqualytic ET 718 Mode D'emploi

14. Changing over door hinges
• Close the door and unscrew the hinge bracket
cessary).
• Pull the door out at the bottom and lift off.
• Unscrew the hinge pin
adjacent re t ain i ng hole.
• Unscrew hinge pin and screw in on opposite side.
• Attach the closure
• Rotate door by 180°.
• Screw the handle onto the door using the holes provided.
• Lift off the cover
with it.
• Mount door on hinge pin
• Insert hinge bracket
• If the door is not flush with the body of the appliance, adjust it using the slots
on the hinge bracket
2 from the hinge bracket
2
1 and plugs
5
and seal the exposed retaining holes on the other side
6
2 and close.
in lower door mounting and screw onto plinth.
1
(ensuring that all screws are securely fastened).
1
18
(support the door if ne-
1
1
on the opposite side.
and screw into the
Rev_3 07/2010