Care And Use - InSinkErator INVOLVE Série Manuel Du Propriétaire

IN-HOME FULL SERVICE LIMITED WARRANTY
View/Wave/Contour/Classic
Hot100/Hot150
This limited warranty is provided by InSinkErator, a business unit of Emerson Electric Co., ("InSinkErator" or "Manufacturer" or "we" or
"our" or "us") to the original consumer owner of the InSinkErator product with which this limited warranty is provided (the "InSinkErator
Product"), and any subsequent owner of the residence in which the InSinkErator Product was originally installed ("Customer" or "you"
or "your").
InSinkErator warrants to Customer that your InSinkErator Product will be free from defects in materials and workmanship, subject to the
exclusions described below, for the "Warranty Period", commencing on the later of: (a) the date your InSinkErator Product is originally
installed, (b) the date of purchase, or (c) the date of manufacture as identified by your InSinkErator Product serial number. You will be
required to show written documentation supporting (a) or (b). If you are unable to provide documentation supporting either (a) or (b), the
Warranty Period commencement date will be determined by Manufacturer, in its sole and absolute discretion, based upon your InSinkErator
Product serial number.
Permitted Uses
You may use your InSinkErator Product hot/cold water tank and filter system in combination with any genuine InSinkErator Product instant
hot water dispensers and component parts and/or Authorized OEM Products. "Authorized OEM Products" mean those hot or hot/cold water
dispensers and component parts that have been manufactured by an authorized InSinkErator original equipment manufacturer ("Authorized
OEM") and which have documentation expressly stating that such Authorized OEM Products are compatible with the InSinkErator Product(s).
Authorized OEMs may change from time to time. A list of Authorized OEMs is available to you upon request or at: www.insinkerator.com/
oem. Use of your InSinkErator Product in combination with any products other than Authorized OEM Products will void this warranty.
What is Covered
This limited warranty covers defects in materials or workmanship, subject to the exclusions below, in InSinkErator Products used by a
consumer Customer for residential use only, and includes all replacement parts and labor costs. YOUR SOLE AND EXCLUSIVE REMEDY
UNDER THIS LIMITED WARRANTY SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE INSINKERATOR PRODUCT,
PROVIDED THAT IF WE DETERMINE IN OUR SOLE DISCRETION THAT NEITHER REMEDY IS PRACTICABLE, WE MAY PROVIDE
YOU A REFUND OF YOUR PURCHASE PRICE OR A CREDIT TOWARDS ANOTHER INSINKERATOR PRODUCT.
What is not Covered
This limited warranty does not extend to and expressly excludes:
• Losses or damages or the inability to operate your InSinkErator Product resulting from conditions beyond the Manufacturer's control
including, without limitation, accident, alteration, misuse, abuse, neglect, negligence (other than Manufacturer's), failure to install,
maintain, assemble, or mount the InSinkErator Product in accordance with Manufacturer's instructions or local electrical and plumbing
codes.
• Wear and tear expected to occur during the normal course of use, including without limitation, cosmetic rust, scratches, dents or
comparable and reasonably expected losses or damages.
• Losses or damages caused by any product or component part used with the InSinkErator Products, including both Authorized OEM
Products and other products and components.
In addition to the above exclusions, this warranty does not apply to InSinkErator Products installed in a commercial or industrial application.
No Other Express Warranty Applies
This limited warranty is the sole and exclusive warranty provided to the Customer identified above. No other express warranty, written
or verbal, applies. No employee, agent, dealer, or other person is authorized to alter this limited warranty or make any other warranty on
behalf of Manufacturer. The terms of this limited warranty shall not be modified by the Manufacturer, the original owner, or their respective
successors or assigns.
What we will do to Correct Problems
If your InSinkErator Product does not operate in accordance with the documentation provided to you, or you have questions concerning your
InSinkErator Product or how to determine when service is needed, please call the toll free InSinkErator AnswerLine® at 1 (800) 558-5700, or
visit our website at www.insinkerator.com. You may also notify us at: InSinkErator Service Center, 4700 21st Street, Racine, Wisconsin
53406 USA.
The following information must be provided as part of your warranty claim: your name, address, phone number, your InSinkErator Product
model and serial number, and if necessary, upon request, written confirmation of either: (a) the date shown on your installation receipt, or
(b) the date shown on your purchase receipt.
Manufacturer or its authorized service representative will determine, in its sole and absolute discretion, if your InSinkErator Product
is covered under this warranty. You will be given the contact information for your closest authorized InSinkErator Service Center.
Please contact your InSinkErator Service Center directly to receive in home warranty repair or replacement service. Only an authorized
InSinkErator service representative may provide warranty service. InSinkErator is not responsible for warranty claims arising from work
performed on your InSinkErator Product by anyone other than an authorized InSinkErator service representative.
If a covered claim is made during the Warranty Period, Manufacturer will, through its authorized service representative, either repair or
replace your InSinkErator Product. Cost of replacement parts or a new InSinkErator Product, and cost of labor for repair or installation
of the replacement InSinkErator Product are provided at no cost to you. Repair or replacement shall be determined by Manufacturer or
its authorized service representative in their sole discretion. All repair and replacement services will be provided to you at your home.
If Manufacturer determines that your InSinkErator Product must be replaced rather than repaired, the warranty on the replacement
InSinkErator Product will be limited to the unexpired term remaining in the original Warranty Period.
This instant hot water dispenser is covered by Manufacturer's limited warranty. This limited warranty is void if you attempt to repair the
InSinkErator Product. For service information, please visit www.insinkerator.com or call, toll free, 1-800-558-5700.
Limitation of Liability
TO THE EXTENT PERMITTED BY LAW, IN NO EVENT SHALL MANUFACTURER OR ITS AUTHORIZED SERVICE REPRESENTATIVES BE LIABLE
FOR ANY INCIDENTAL, SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES, INCLUDING ANY ECONOMIC LOSS, WHETHER RESULTING
FROM NONPERFORMANCE, USE, MISUSE OR INABILITY TO USE THE INSINKERATOR PRODUCT OR THE MANUFACTURER'S OR ITS
AUTHORIZED SERVICE REPRESENTATIVE'S NEGLIGENCE. MANUFACTURER SHALL NOT BE LIABLE FOR DAMAGES CAUSED BY DELAY IN
PERFORMANCE AND IN NO EVENT, REGARDLESS OF THE FORM OF THE CLAIM OR CAUSE OF ACTION (WHETHER BASED IN CONTRACT,
INFRINGEMENT, NEGLIGENCE, STRICT LIABILITY, OTHER TORT OR OTHERWISE), SHALL MANUFACTURER'S LIABILITY TO YOU EXCEED THE
PRICE PAID BY THE ORIGINAL OWNER FOR THE INSINKERATOR PRODUCT.
The term "consequential damages" shall include, but not be limited to, loss of anticipated profits, business interruption, loss of use or
revenue, cost of capital or loss or damage to property or equipment.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation may not apply to you.
This limited warranty gives you specific legal rights and you may also have other rights which vary from state to state.
12
3-year warranty
1-year warranty
NOTICE

CARE AND USE

Electric Shock Hazard: To prevent electrical shock, disconnect power before
servicing unit. Use only a properly grounded and polarized electric outlet.
ADJUSTING THE THERMOSTAT
Factory temperature pre-set
approx. 200°
is approximately 200˚F.
Adjust the thermostat
slowly, turning the dial
clockwise to increase
temperature or counter
clockwise to decrease
temperature, then activate faucet handle
for 20 seconds to bring in fresh water
to be heated at the new setting. Allow
5-7 minutes for water to reach new
temperature.
NOTICE
To reset the thermostat to 200°, turn the indicator
two notches to the right of vertical.
Scalding Hazard: Do not allow
water to boil. May result in
severe burns.
SEASONAL STORAGE/DRAINAGE
Anytime the instant hot water dispenser is not used
for extended periods of time, unplug and drain unit.
If it is below freezing you will need to unplug the unit
and drain it.
Disconnect power from unit (unplug unit).
Push hot water dispenser faucet lever
and allow water to flow until it is cool.
Shut the cold water supply off at the valve.
Disconnect tubes from the tank.
Unhook tank from wall.
Hold tank upside down and drain the
water into the sink.
Towel dry any water drippings from
tank area.
Reinstall tank to wall and reconnect tubes.
Remove and discard filter cartridge,
if applicable.
To put back into working order, install
new filter cartridge (if applicable) and
turn on cold water supply at valve.
Depress the hot water dispenser faucet
lever and hold until water flows from the
spout. Reconnect the electrical cord.
(Refer to Page 10, Step 6B)
CLEANING THE FAUCET AND TANK
Only use mild cleaners to clean the
faucet and plastic components.
Cleaners with acids, abrasives, alkaline
or organic solvents will result in
deterioration of the plastic components
and void the warranty.
PROPERTY DAMAGE
Regularly inspect the unit for any signs
of leakage. If there are signs of water
damage, immediately remove the unit
from service.
To avoid water damage from leakage,
replace all cut, loose or split tubing.
A drain pan, plumbed to an appropriate
drain or outfitted with a leak detector,
should be used in those applications
where any leakage could cause
property damage.
PERSONAL INJURY
Regularly check for signs of corrosion
by examining the appearance of the
dispensed water.
If there is any discoloration or rusty
appearance, unplug and drain unit
as described in the Seasonal
Storage/Drainage section on this
page of the manual.
If the water discoloration remains
after draining and refilling unit,
discontinue use and contact an
authorized InSinkErator service agent.
For fresher tasting water, add filtration to your
instant hot water dispenser system. InSinkErator
offers water filtration systems designed exclusively
for instant hot water dispensers. For more
information, visit www.insinkerator.com or
shop.insinkerator.com.
13