10
www.aeg.com
competence to handle refrigerants
safely in accordance with an industry
recognised assessment specification.
• Servicing shall only be performed
as recommended by the equipment
manufacturer. Maintenance and
repair requiring the assistance of
other skilled personnel shall be
To prevent injury to the user or other
people and property damage, the
following instructions must be followed.
Incorrect operation due to ignoring
instructions may cause harm or damage.
The seriousness is classified by the
following indications:
WARNING!
This symbol indicates the possibility
of death or serious injury.
CAUTION!
This symbol indicates the
possibility of injury or damage
to property.
Warning
Plug in power plug properly
Do not operate or stop the unit by inserting
or pulling out Die power plug
Do not damage or use an unspecified power
cord
Do not modify power cord length or share
the outlet with other appliances
Do not operate with wet hands or in damp
environment
Do not direct airflow at room occupants
Always ensure effective earthing
Do not allow water to run into electric parts
Always install circuit breaker and a
dedicated power circuit
Unplug the unit if strange sounds, smell,
or smoke comes from it
Do not use the socket if it is loose or
damaged
carried out under the supervision of
the person competent in the use of
flammable refrigerants.
• The working temperature range of the
air conditioner is 16-35
under cooling mode; 5-27
under heating mode.
Meanings of symbols used in this manual
are shown below:
This symbol indicates never
to do this.
This symbol indicates always
do this.
2.2 Warning during usage
WARNING!
Warning during usage
Meaning
Otherwise, it may cause electric shock,
fire and explosion due to excess heat
generation
It may cause electric shock, fire and
explosion due to heat generation
It may cause electric shock, fire and
explosion. If the power cord is damaged,
it must be replaced by the manufacturer
or an authorised service centre or a
similarly qualified person in order to
avoid a hazard
It may cause electric shock, fire and
explosion due to heat generation
It may cause electric shock
This could harm your health
Incorrect earthing may cause electric
shock
It may cause failure of unit or electric shock
Incorrect installation may cause electric
shock, fire and explosion
It may cause electric shock, fire and
explosion
It may cause electric shock, fire and
explosion
o
o
C (60-95
F)
o
o
C (41-80
F)