Important Safety Information; Anti-Tip Bracket - Danby Designer DER244WC Manuel Du Propriétaire

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS
• A child or adult can tip the appliance and be killed.
• Verify the anti-tip bracket has been properly installed and engaged to the fl oor or wall.
• Ensure the anti-tip bracket is re-engaged when the range is moved by sliding the anti-tip
arm under the bracket.
• Do not operate the range without the anti-tip bracket in place and engaged.
• Failure to follow these instructions can result in death or serious burns to children or adults.

ANTI-TIP BRACKET

To reduce the risk of the appliance tipping over, an anti-tip bracket is provided that must be installed before
operating the appliance. See installation instructions shipped with the bracket for complete details.
1. Anti-tip bracket
2. Right side panel
3. Rear wall
4. Anti-tip bracket
5. Anti-tip arm
1
To check if the bracket is installed and engaged properly, look underneath the range to see that the anti-tip
arm attached to the right side panel is engaged on the bracket. On some models, the storage drawer or
kick panel can be removed for easier inspection.
If visual inspection is not possible, slide the range forward, confi rm the anti-tip bracket is securely attached
to the fl oor or wall and slide the range back so the anti-tip arm slides under the anti-tip bracket. If the
range is pulled from the wall for any reason, always repeat this procedure to verify that the range is
properly secured by the anti-tip bracket.
WARNING - TIP OVER HAZARD
3
SAVE THESE INSTRUCTIONS!
2
2
4
5