Mi XMKDDYJ01HT Manuel D'utilisation page 5

Indicator Instruction
Ba ery Level Indicator
Bluetooth Indicator
Indicator
Precautions
The printer's optimal operating temperature is 15°C to 35°C at a
1.
relative humidity of 40% to 60%. Improper temperature or humidity
levels may adversely affect print quality, including causing paper
jams or incomplete printing.
2.
To ensure print quality, only use genuine photo paper and the
included Smart Sheet.
Do not mix using photo paper and Smart Sheet from different
3.
packages, as this may impact print quality. For best results, load an
entire pack of photo paper each time the printer is out of paper and
use the Smart Sheet included with each new paper pack to
recalibrate the printer.
When loading paper, do not touch the glossy side, as this can leave
4.
fingerprints and impact print quality. Add paper glossy side up and
place the Smart Sheet on the bo om of the stack with its barcode
facing down.
To ensure proper printer function and print quality, do not block the
5.
output tray or touch the paper during printing. Do not a empt to
force paper out of the printer, as this can damage the printer.
6.
Do not store photo paper at high temperatures or in direct sunlight,
as this can cause the paper to become discolored. Do not expose to
humid environments, water, and other liquids so as not to cause the
paper to become discolored and wrinkled. Avoid any dust as it can
cause scratches on the paper and damage the printer.
Pulsating white
White
Off
Orange
Blue
Off
White
Blinking white
Blinking orange
Low ba ery level
Ba ery is sufficient/Fully charged
Ready to pair
Successfully paired
The printer is off
The printer is standing by
Printing/Updating firmware
04
Charging
Printer error