iRoom iBezel Mode D'emploi page 8

Option I: Connecting 110-240VAC
Connect the wires to the connector according color-code:
cable coloring:
Specifications:
Type
Dimensions
Power Supply
LAN
Communication
Function Description
Digital inputs / digital outputs
iBezel - Intelligent Glass Bezel
Audio out
Operating Temperature
Operating Humidity
Relay0 Contact rating (resistive)
Terminal specifications (9 x DI / 1 x DO)
Restoring the Default Configuration and Password:
You can restore factory defaults in two ways:
1. Use the „restore to factory settings" function of the iRoom's iDock iOS-App
• Access-Code is required
2. Use the Default Reset DIP Switch#1 on the rear panel of the router:
• Power off your iRoom's iDock
• Switch DIP#1 to ON
• Power on your iRoom's iDock and wait until LED is flashing quickly.
• Power off your iRoom's iDock
• Switch DIP#1 to OFF
• Restore process finished.
To locate the DIP Switch please refer to chapter „Main Board Feature Overview".
european standard
number
color code
1 black
2 blue
3 yellow/green
This information is supplied without liability.
iRoom's iBezel
iBezel-5-b / iBezel-5-w
W x H x D 351.9 / 226.4 / 68.2 mm or 13.9" / 8.9" / 2.7"
100-240VAC; 50/60Hz; 0,35A; POE+ (44-57VDC; 0,6A)
10Mbps/100Mbps
TCP / status & control
Store & charge iPad, supply with remote LAN control functions
9 DI (contact closure) / 1 DO (relay; 30VDC, 1A / 125VAC, 0.3A)
8+1 touch buttons (with customizable icons) / 1 motion sensor
stereo analog, 3.5 mm audio jack
0 - 35°C or 32 - 95°F
20% - 90% RH non-condensing
Relay & Terminals
30VDC, 1A / 125VAC, 0.3A
26-20 AWG / 0.13-0.52 mm²
us standard
naming
color code
black hot (L)
white neutral (N)
green ground (PE)
Page 8