User Manual - Jaz audio TEJZHEADPHSAMBABT Mode D'emploi

UK
INSTRUCTION MANUAL
Switching On And Coupling
Press and hold the A button for 5 seconds until "POWER ON"
is heard, the LED will start to fl ash blue and red. Open the
smartphone's Bluetooth settings and select "JAZ SAMBA".
Shutdown
Press and hold the A button for 5 seconds until "POWER OFF" is
heard. The LED will turn off .
Play/pause music
Press the A button once to pause the music.
Press the A button once to play the music after the headset is
connected to the smartphone.
Answer/End Calls
Press the A key once to answer a call.
Press the A key once during a call to end the call.
Track change
Press and hold the + button to move to the next song.
Press and hold the - button to go back to the previous song.
Increase/decrease volume
Press the + key briefl y and repeatedly to increase the volume.
Press the - key briefl y and repeatedly to decrease the volume.
Headset charging
To charge the headset use the charging cable included in the
package.
Insert the micro USB connector into the micro USB port on the
headset and the USB connector into a travel charger or a USB port
on a PC. The LED will light red and, once the charge is complete,
it will switch off .
Use with 3.5 Mm jack cable
The headphones, if uncharged, can also be used with a 3.5 mm
jack audio cable.
Insert the 3.5 mm jack cable into the 3.5 mm jack port of the
headset and connect it to a smartphone, tablet or PC
4