Electrical Connection Diagram; Safety Warnings - Sacopa ONLED RGBW-DMX Manuel D'installation Et D'entretien

2.1. Electrical connection diagram

3. SAFETY WARNINGS:

• The persons who are in charge of assembly should have the required qualifications for this type of work.
• Avoid making contact with the electric voltage.
• Comply with the current standards regarding accident prevention.
• In this regard, the IEC 364-7-702 standards must be observed. WIRING IN BUILDINGS. SPECIAL WIRING. SWIM-
MING POOLS.
• In this respect, for Quadraled models, it must comply with IEC 364-7-714: ELECTRICAL INSTALLATIONS OF
BUILDINGS. OUTDOOR LIGHTING INSTALLATIONS.
• Any operation related to the maintenance or replacement of parts should be performed with the floodlamp
disconnected from the electric power system.
• The manufacturer is not responsible in any circumstances for assembly, installation or start-up of any electric
components which have been inserted or handled at locations other than its own premises.
4