Speaker Placement - ELAC Navis Série Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Speaker Placement

Achieve maximum performance and optimal sound quality from your ELAC Navis speakers with proper speaker
placement and set-up. While not all rooms are the same, use the following guidelines to configure the speakers
for your particular room. There are no "exact" rules or boundaries in setting up your speakers but the following
suggestions will help optimize your desired results. Remember the best sound set-up is what sounds best for
you so don't be afraid to experiment and make adjustments to the placement and directivity of the speakers.
Walls
1' –2' FEET
1' –2' FEET
Place the speakers approximately one to two feet away (fig. 1) from boundaries such as wall(s) and especially
corners. Close proximity to a side or rear wall will enhance bass performance (output), but being too close
(particularly to a corner) may result in bass that is unnatural. If a corner location is unavoidable, try to position the
loudspeaker so that the distance to the rear wall is not equal to the distance to the side wall.
ELAC Navis Speakers | www.elac.com | Page 9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Arb-51Arf-51

Table des Matières