Connecting To Power Source - OK. OPD 800 Mode D'emploi

COnnECTinG TO POwER sOuRCE

1
Make sure the power
switch is set to OFF.
4
During charging: Charge
LED will light up red.
Full battery: Charge LED
will turn green.
COnnECTinG TO TV / MOniTOR
37
2
Plug the power adapter
into the DC 9V jack.
4 h
5
Charge battery for at
least 4 hours before
using first time!
TV
Use A/V cable (not
provided) to connect
AUDIO and VIDEO
outputs to respective
inputs of TV.
En
3
Plug the unit in.
nOTE
If the built-in battery
power is low, the low
battery icon will flash
for a while, then the
player will turn itself off
automatically.
CAR PLuG
Use car plug to connect
to cigarette lighter sock-
et. Not for use in 24V
vehicles.