Storch 216138 Instructions De Montage page 11

Installation instructions for the aqua adapter Tapetomat E
1
Before installing the aqua adapter, the
standard wallpaper paste roller must
be removed from the Tapetomat unit.
To do this, the wallpaper paste roller
must be pulled upwards out of the lo-
cking mechanism.
4
Turn the adapter clockwise so that the
square strut faces the front of the Ta-
petomat.
The wall covering is now led through
the water bath.
2
Insert the aqua adapter into the locking
mechanism. The square strut is aligned
with the table side of the Tapetomat.
5
Close the lid again and pull the wetted
wall covering forward to the cut edge.
11
3
Insert the wall covering below the two
top struts and push it forward until it
sits on the wallpaper trays.