Facom DB1.RFID Notice Originale page 22

'xx/xx' in the top right indicates the number of problem(s) detected mentioned above.
'xxx.... ' in the lower left designates the reference of the tool recorded in the database.
• If one or several tool(s) are detected as being outside the reference list, the
following message appears:
'x.... ' designates the reference of the RFID chip
 Press the ON/OFF button to power off the bag. Browse using the arrow to confi rm
your selection.
 The bag is off.
2/ Advanced Mode – (Manager)
To return to the work mode from the advanced mode, power off the bag and power it
on again.
This section explains how to:
• Access the advanced mode
• Change the password
• Manage the reference list: add/remove tools or clear the list
• Access the database and modify it
• Change the language of the menus.
To work on the database, the software must be installed on your computer.
Warning: you must have the administrator rights to install the software on your PC.
NU-DB1.RFID_0216.indd 22
22
3/25/2016 9:14:23 AM