Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
MAINTENANCE
Keep all nuts, bolts and screws tight to ensure
that the leaf blower/garden vacuum is always in a
safe working condition.
The leaf blower/garden vacuum should be stored
in a dry, high or locked up place out of the reach of
children.
Replace worn or damaged parts for safety.
Check the collection bag frequently for wear or
deterioration.
Do not attempt to repair the machine unless you
are qualified to do so.
DESCRIPTION
Your blower vac has been designed for leaf
clearing. This tool is intended for consumer and
outdoor use only.
1) Handle
2) Switch trigger
3) Power cable and plug
4) Belt
5) main housing
6) Function switch
7) Upper tube
8) Lower tube
9) Wheel bracket
10) Wheels
11) Collection bag
12) Hook for bag
13) Cable hook
14) Bag connection
MOUNTING THE TUBE
2a & 1b – 2d – 2e – 2f
_
Connect both parts of the tube as shown.
_
Slide the tube into the housing .
_
Fit the tube using the screws.
_
To remove the tube, remove the screws
and pull the tube out of the housing.
Switch off and unplug the
appliance before mounting or
removing the tube.
MOUNTING THE COLLECTION BAG
4a – 4b
_
Place the collection bag (11) onto the connection
(14). Make sure to slide the collection bag opening
past the raised edge.
_
Fit the brace to the suspension point.
SELECTING THE OPERATING
MODE
Select the required operating mode before
use (blowing or vacuuming).
_
For blowing, turn the switch (6) to the
blowing symbol.
_
For vacuuming, turn the switch to the
vacuuming symbol.
INSTRUCTIONS FOR USE
_
Connect the appliance to a suitable extension
cord.
_
Hold the appliance with both hands.
_
Slowly move the appliance back and forth.
_
Keep the wheels on the ground during use to
reduce the workload.
When operating, always hold the machine close to
the ground.
Do not blow hot, flammable or explosive material.
The garden vacuum is only suitable for foliage and
garden waste.
Please inspect the area for little animals and hard
objects before using the tool.
Do not vacuum liquids, plastic bags, cans, pine
cones, branches larger than 5 mm, cloth, tissues
and pegs.
SWITCHING ON AND OFF
To switch on the blow/vac push in the on/off trigger
switch (2). And hold
to switch off the machine, release the on/off trigger
switch.
CLEANING AND MAINTENANCE
Check the blower vac for any signs of damage
before each use.
After using the machine
1. Empty the leaf bag.
2. Check the vacuum tube and remove leaf residue.
3. Check the blower vac's slide control for leaf
residue.
4. Clean the machine with a soft dry cloth.
5. Store the machine in a safe place where it is out
of the reach of children.
If the device can not be started or continues to
malfunction, you need to check and repair the
device by a Service Centre.
23
Publicité
Table des Matières
