Table des Matières
Publicité
Section 2 - Installation
4
Twist the screws into the anchors, leaving the tops of the screws
/
exposed from the surface. Do not over tighten the screws.
5
Align the mounting holes on the bottom of the camera with the
/
screws. Slide the camera down to lock it into place.
6
Twist the camera to your desired position. Go to the settings in the
/
app and enable Invert Image if the image is up-side-down.
D-Link DCS-8325LH User Manual
2.6 ~ 3.0 mm
2.6~3.0mm
2.6~3.0mm
12
Publicité
Table des Matières
