Acova MADRAS Notice D'utilisation page 19

N
Access the advanced settings of your remote control to decide whether to
instruct the appliance to perform:
- a boost of the radiator alone (default setting),
- or a blower boost,
- or a radiator boost + blower boost.
The selected parameter will affect programmes P1 and P2 (see chapter 3.3,
parameter 3).
The blower boost time and the radiator boost time can be modified (see
chapter 3.3, parameters 1 and 2).
ImPOrTAnT Starting a manual boost while P1 and/or P2 are activated will not
cancel the existing programming, which will take place as scheduled.
3.1.3 Setting a daily programme
Press and hold P1 or P2 to access the start time setting of the selected
programme.
Symbols P1 or P2 and start to blink, and the start time of programme P1 or
P2 is displayed.
The start time of programme P1 or P2 can be adjusted in 15-minute increments
by pressing the + and - keys.
Press P1 or P2 briefly, or do not press any keys for 10 seconds to quit setting
mode. The start time is saved and P1 or P2 is activated.
a
C
36
B
d
Press P1 or P2 briefly to activate/deactivate programme P1 or P2. Symbol P1
or P2 is displayed on the screen to indicate it has been activated.
P1 activated
A frame appears around symbol P1 or P2 when the programme start time is
reached and it continues to be displayed throughout the duration of the programme.
To suspend the programme while it is in progress, press P1 or P2 briefly.
The frame around symbol P1 or P2 will disappear. The programme will continue to be
repeated as usual over the following days.
N
P1 non activated
37