Setting The Channel; Setting The Alarm Time; Setting The Volume - switel SPF8266 Manuel D'utilisation

3
.4

Setting the Channel

1. Press MENU button till function mode appears. See Fig 14.
2. Press MENU selection buttons
SELECT button.
NOTE1: If you own a camera (channel 1) , please select RF1.
NOTE2: If you own two cameras(channel 1 & 2),please select RF1 & RF2.
3. After using buttons
3
Setting the Switch Time
.5
If you own several cameras, you can take turns to monitor.
1. Press MENU button till function mode appears. See Fig 15.
2. Press MENU selection buttons
and press the SELECT button.
3. After using buttons
3
.6 Setting the Alarm
The monitor will emit the alarm sound and glisten when the camera
senses motion.
1. Press MENU button till function mode appears. See Fig 16.
2. Press MENU selection buttons
press the SELECT button.
NOTE:The monitor will emit the glisten only, if you select MUTE.
3. After using buttons
3
.7

Setting the Alarm Time

1. Press MENU button till function mode appears. See Fig 17.
2. Press MENU selection buttons
or 60SEC, and press the SELECT button.
3. After using buttons
3
.8

Setting the Volume

Press buttons
4
& to finish adjusting, press the SELECT button.
& to finish adjusting, press the SELECT button.
& to finish adjusting, press the SELECT button.
& to finish adjusting, press the SELECT button.
& to select volume. See Fig 18.
& to select Channel, and press the
& to select 4SEC or 8SEC,
& to select ON.OFF or MUTE, and
& to select 15SEC.30SEC