Installation Information - DURAVIT Happy D.2 760319 Notice De Montage

Important information
regarding the mounting instructions
These mounting instructions come as part of the Duravit
bathtub and should be read carefully prior to installation.
Explanation of the key words and symbols
DaNGEr! At high risk of fatal hazards or serious
injuries
NotE! In the case of potential damage to property
Link to the Electrical Installation section
Link to installation information in this section
Inspection (e.g. for scratches)
Indication of the length of time (e.g. 10 minutes)
Inspect to check for leaks and tightness
Indication of the temperature
Control unit
(Number depends on the whirl system)
target group and qualification
The whirltub must only be installed by trained plumbing
engineers. The electrical installation may only be carried
out by qualified electricians.
NotE! Local installation regulations and any country­
specific standards must be observed at all times.
Safety information
DaNGEr! risk of fatal electric shock.
6
WH_M_FST_MV­AV_Oval/15.12.3

Installation information

Please read pre­installation datasheets prior to the
installation. These are available to download on the
Internet at www.duravit.com.
NotE! Seitenansicht
If the tray has a base inlet, a pipe interrupt must always
be installed on­site.
> See installation diagram.
Securing the bathtub (Diagram 12)
12
> Select the fixings according to the floor
construction.
Technische Verbesserungen und optische VerŠnderungen an den abgebildeten Produkten behalten wir uns vor.
We reserve the right to make technical improvements and enhance the appearance of the products shown.
Datum Name Ma§stab Artikel-Nr.
Checking the whirl system (Diagram 20)
20
Date Scale Model-No.
Gezeichnet Name
08.10.13 Allgaier 1:20
Drafted
GeprŸft Bezeichnung
> Switch on the whirl system for 10 minutes: 08.10.13 WLT 1:10 X
Certified Description
GeŠndert
1:5
Modified
run this through once completely in the case of
circuits with different levels of intensity.
> Leave the water in the bathtub and wait 10
minutes.
> Check to make sure that it is leak­tight.
> If adjustments are required, repeat the check.
Maintenance (Diagram 25)
25
> Raise the bathtub out of its surround for
maintenance.
Lateral view
Zeichnung
000000 # W-T- 000000 - 00 - 0
Drawing
Schematische Zeichnung mit Rohrunterbrecher
Spezial Ab-und †berlaufgarnitur mit Bodenzulauf
fŸr Badewanne
Special waste and overflow with base inlet
for bathtubs