DeWalt DCT418 Guide D'utilisation page 4

performed. Use of the hand-held radar scanner for operations
different from those intended could result in a hazardous
situation.
Battery Tool Use and Care
a) Recharge only with the charger specified by D
charger that is suitable for one type of battery pack may create
a risk of fire when used with another battery pack.
b) When battery pack is not in use, keep it away from other
metal objects like paper clips, coins, keys, nails, screws,
or other small metal objects that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
c) Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause
irritation or burns.
Safety Information for Hand-Held Radar
Scanners
WARNING: Do not disassemble or modify the hand-held
radar scanner. There are no serviceable parts inside. If you need
assistance, contact D WALT at 1-800-4-D
E
or go to http://www.dewalt.com on the Internet.
• Do not operate the hand-held radar scanner in explosive
atmospheres, such as in the presence of flammable liquids,
gases, or dust. Hand-held radar scanners create sparks which
may ignite the dust or fumes.
• The hand-held radar scanner should only be used with
specifically designated D WALT batteries. Use of any other
E
batteries may create a risk of fire.
• Store the hand-held radar scanner out of reach of children
and other untrained persons. Tools are dangerous in the hands
of untrained users.
• Do not disassemble the hand-held radar scanner. There are
no user serviceable parts inside.
WALT. A
E
• Do not remove or deface warning labels.
• The hand-held radar scanner must remain in contact with
the wall surface during the entire scan.
• Optimal operation of the hand-held radar scanner is possible
only when the operating instructions are read and followed.
• Do not attach any stickers on name plates to the sensor
area on the back of the hand-held radar scanner. Metal
stickers especially could affect the measurement results.
• Before turning on the hand-held radar scanner, ensure that
its back surface is not moist. If required, wipe with a dry cloth
before scanning.
• Do not expose to extreme temperatures or variations in
temperature. In case of large variations in temperature,
allow the unit to adjust to ambient temperature before
powering on. Extreme and variations in temperature can impair
the display and accuracy of the tool.
• Static electricity may lead to inaccurate detection of
electrical wires.
WALT (1-800-433-9258)
E
WARNING: Do not expose hand-held radar scanner or
battery to excessive heat such as sunshine, fire or the like.
WARNING: Modifications not authorized by the manufacturer
may void user's authority to operate this device.
WARNING: The detector alone should not be relied on
exclusively to locate items below the scanned surface. Under
certain circumstances, the scanner may not identify all objects or
the exact location of objects. Use other information sources to help
locate items before penetrating the surface. Such additional sources
include construction plans, visible points of entry of pipes and wiring
2