Safety Notes; Functional Description; Intended Use; Product Features - CST/BERGER LD440 Notice Originale

Safety Notes

Read and observe all instructions. SAVE
THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
Have the measuring tool repaired only through qual-
ified specialists using original spare parts. This
ensures that the safety of the measuring tool is maintained.
Do not operate the measuring tool in explosive envi-
ronments, such as in the presence of flammable liq-
uids, gases or dusts. Sparks can be created in the
measuring tool which may ignite the dust or fumes.
Keep the measuring tool away from car-
diac pacemakers. The magnets 1 generate a
field that can impair the function of cardiac
pacemakers.
Keep the measuring tool away from magnetic data
medium and magnetically-sensitive equipment. The
effect of the magnets 1 can lead to irreversible data loss.
Read and strictly observe the safety warnings in the
operating instructions of the rotational laser.

Functional Description

Intended Use

The measuring tool is intended for swift finding of rotating laser
beams in the wavelength listed in the "Technical Data".
2 610 A13 729 • 17.2.10

Product Features

The numbering of the product features shown refers to the illus-
tration of the measuring tool on the graphic page.
1 Magnets
2 Sensor for Strobe Shield
3 Direction LED "move downward"
4 Centre-indication LED
5 Centre mark
6 Direction LED "move upward"
7 On/Off button
8 Button for adjustment of the measuring accuracy
9 Audio signal button
10 Reception area for the laser beam
11 Display
12 Battery lid
13 Serial number
14 Latch of battery lid
15 Holder
16 Rotary knob of the holder
17 Locking screw for holder
Accessories shown or described are not part of the standard
delivery scope of the product. A complete overview of accesso-
ries can be found in our accessories program.
Display Elements
a Audio signal indicator
b Battery low indicator
c Direction indicator "move upward"
d Centre indicator
e Direction indicator "move downward"
f "Fine" adjustment indicator
g "Medium" adjustment indicator
h "Coarse" adjustment indicator

Noise Information

The A-weighted sound pressure level of the audio signal can
exceed 85 dB(A).
Do not hold the measuring tool close to your ear! Wear
hearing protection!
TM
function

English | 9