Key Pad Functions - Danby DDR3008EE Manuel D'utilisation

KEY PAD FUNCTIONS.

7
6
5
1. LED (SETTING HUMIDITY): The LED
window displays the following information
independently;
A. Set Operating Relative Humidity Value.
B. Fuction indicator will light up;
(Fan Speed, Time, Self Dry)
2. ON/OFF Button : Each time this button is
pressed the unit turns On (adjacent indicator light
illuminates) or Off (adjacent indicator light is not
illuminated).
3. HUMIDITY DOWN: This button allows you to
decrease the relative humidity setting. Each time
this button is pressed the RH value setting is
decreased incrementally by 5%. (ranging from
80% ~ 35%)
4. HUMIDITY UP: This button allows you to
increase the relative humidity setting. Each time
this button is pressed the RH value setting is
increased incrementally by 5%. (ranging from
35% ~ 80%)
1
9
8
5.SELF DRY:Self Dry mode can be used to clean
the unit and removes excess humidity. You can
operate Self Dry mode when the dehumidifier is
powered on or off.
The inside moisture of the unit is removed in 30
minutes.
After 30 minutes, the product will power off.
6. CONTINUOUS: Used for Continuous
Dehumidifier Operation. (unit will run non-stop)
LED
will be displayed [
7.FAN SPEED: Press the Fan speed button to select
the fan speed (Hi/Low)
8.Timer: Press the Timer button to select the off
timer to shut off in 3Hr  6Hr  or 12Hr.
9.WATER FULL INDICATOR: This (red) light
illuminates under the following conditions;
A. When the internal water tank is not properly
installed inside the cabinet.
B. When the internal water tank is full. The
Water tank must be emptied and replaced
back in the cabinet before normal operating
conditions can resume.
7
4
3
2
].