Declaration Of Ce Conformity; Raccordement Performance Ou Ensemble Perf.-Eclat / Performance Or Perf.-Eclat Combination Connection - Depaepe Telecom S.A.S. HENRI Mode D'emploi

Table des Matières

Publicité

Declaration of CE conformity

Name : Henri Depaepe SAS
Head office :
Address : 75-77 rue du Pré Brochet
Locality : SANNOIS
Product identification:
- Family : Telecommunications Terminal Equipment
- Type : Ringers
- Model : Mélodie/Performance/Eclat
- Other information :
We, Henri Depaepe SAS, hereby declare that this product is in
conformity with the essential requirements and other relevant provisions
of the R&TTE directive 1999/5/EC of the European Parliament and of the
Council of 9 March 1999 on radio equipment and telecommunications
terminal equipment and the mutual recognition of their conformity, as
well as the harmonised standards :
For health and safety:.......................EN 60950 -1:2006
For electromagnetic compatibility: EN 55022:2006 +A1 : 2007 Class B
For public communications network connection: TBR 37 (21) and TBR 38
Made in France
12
Phone : 33 (0) 1 30 25 81 60
Fax : 33 (0) 1 39 98 61 24
Postal code: 95110
EN 55024 : 1998 + A1 : 2001 + A2 : 2003
Raccordement Performance ou Ensemble Perf.-
Eclat / Performance or Perf.-Eclat combination
connection
- Dénuder les 2 fils de raccordement,
- Dévisser les 2 plots du bornier (page 6) suivant le mode choisi C.A.
ou C.C. (figure 1 ou 2),
- Insérer les 2 fils dans le bornier, et revisser les 2 plots,
- Configurer le choix de tonalité (voir § Sélection Tonalité ci-dessous),
- Loger le surplus de fils dans le puit de raccordement,
- Passer le cordon dans l'un des 2 passages prévus (voir page 2),
- Placer la sonnerie sur la vis de fixation (voir § Installation murale).
- Strip off the two connection wires,
- Unscrew the two ports (page 6) according to the selected AC
or DC signal (figure 1 or 2),
- Insert the two connection wires in the ports,
- Screw the two ports,
- Set the tone choice (see Tone setting here after),
- Place the line cord in the selected cord entry (see page 2),
- Align the slot at the base of the device in front of the screw
on the wall and pull down (see Wall mount installation).
13

Publicité

Table des Matières
loading

Produits Connexes pour Depaepe Telecom S.A.S. HENRI

Table des Matières