Technical Features - Teuco AUDIO BLUETOOTH Manuel De L'utilisateur

EN EN
TEUCO BLUETOOTH AUDIO
Hi-Fi for well-being.
The TEUCO BLUETOOTH AUDIO allows you to complete your sensorial experience by listening to your
favourite tunes during your cleansing or well-being treatment.
This allows to play-back the audio tracks via Bluetooth wireless transmission or cabled transmission via the
two RCA channels (where featured), which allow you to connect the device to any compatible audio player
permanently.
INSTALLATION
To install the TEUCO BLUETOOTH AUDIO system,
respect the indications given in the pre-installation
sheets attached to the product and in compliance
with the IEC 64-8 Standard.
The connection to one or more Teuco speakers is via
relevant sealed connectors.
Nota bene: the device is poweredp ermanently
by the mains electricity.
USE
To play-back the musical tracks via RCA connection,
just start the player.
To use a device fitted with Bluetooth transmitter, the
latter must be positioned close by and the Teuco
audio device called "BLUTOO MODO" must be
searched for in the same.
A synchronisation code is requested to activate
the connection; this must be introduced into the
transmission device: "0000".
At this point the connection is active and the system
is ready to play back the audio.
Nota bene: the play-back sequence, the volume adjustment and the balance must be controlled
from the player device, whether via RCA (where featured) or Bluetooth. Transmission with just
one device at a time is possible, whether via Bluetooth or RCA input. This product may not be
compatible with all functions envisioned. Refer to the device user manual for the details.
Teuco Spa reserves the right to make any modifications deemed appropriate without the obligation of forewarning or replacement.
4

TECHNICAL FEATURES

The pre-selected music can be listened to through
streaming from a source fitted with Bluetooth
wireless transmitter with A2DP / AVRCP profiles or via
connection to a fixed source with RCA connections
(where featured).
MAIN TECHNICAL FEATURES
Protocol: Bluetooth 2.1
®
Profiles: A2DP, AVRCP
Frequency: 2.4 GHz
Pairing code: 0000
Device name: BLUTOO MODO
L/R ch outputs: 10Wrms@4ohm
(in the stereo variant)
Mono output: 3Wrms@4ohm
(in the mono variant)
RCA input (where featured): two female connectors
Power supply: 220-240 Vac 50/60 Hz
Frequency response: 20-20kHz
Protection rating: IPX5
Storage temp.: -5/55 °C
®
AUDIO BLUETOOTH