Unpacking The Appliance; Overview Of The Components / Scope Of Delivery; Controls; Notes For Use - Proficook PC-MBG 1185 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
• Cleaning and user maintenance shall not be made by children
unless they are older 8 years and supervised.
• Keep the appliance and its cord out of reach of children less than
8 years.
CAUTION:
This appliance is not intended for immersion in water during
cleaning. Please refer to the instructions provided in the chapter,
"Cleaning / Maintenance".

Unpacking the Appliance

1. Take the appliance out of its packaging.
2. Remove all the packaging material such as plastic foil,
filling material, cable ties and cardboard packaging.
3. Check that all parts are supplied in the box.
4. In case of incomplete delivery or damage, do not operate
the appliance. Return it to your dealer immediately.
NOTE:
There may still be dust or production residues on the
appliance. We recommend to clean the appliance as
described under "Cleaning / Maintenance".
Overview of the Components /
Scope of Delivery
1 Temperature switch TEMP
2 Function switch
3 Indicator light TEMP
4 Program switch
5 Operation indicator light POWER
6 Time / main switch
7 Heating element
8 Glass door
9 Door handle
10 Grill rack
11 Baking tray / drip pan
12 Crumb tray
13 Removal tool for grill rack and baking tray
14 Revolving spit
14a Spit forks
15 Removal tool for revolving spit
16 Splash guard
No Illustration
Pizza stone
40
PC-MBG1185_IM

Controls

Temperature Switch (1)
• For convection, choose a temperature between 80 °C
and 190 °C.
• For top and bottom heat, choose a temperature between
100 °C and 230 °C.
Function Switch (2)
Off
Revolving spit
Air circulation
Revolving spit and air circulation
Program switch (4)
Off
Top heat
Bottom heat
Top heat and bottom heat
Time / Main Switch (6)
Select an operating time of up to 90 minutes.
The oven is switched off at position OFF. The control lamp
is off.

Notes for Use

Electrical Connection
1. Make sure that the function switch (6) is in the OFF
position.
2. Check whether the mains voltage that you want to use
matches the one of the appliance. You will find the infor-
mation about this on the type plate.
21.06.19

Publicité

Table des Matières
loading

Table des Matières