Cold Water Cooling Register For Air1 Xc Ventilation Units; Cold Water Cooling Register For Air1 Xh And Rh Ventilation Units - Helios AIR1-KR KW Série Notice De Montage Et D'entretien

Installation and Operating Instructions
m
DANGER
Cold Water Cooling Register AIR1-KR KW
When using the cooling register below, the corresponding AIR1 XC unit must be suspended lower from the ceiling (see
table, Fig. 8).
– for ventilation units AIR1 XH and RH
When installing the unit, the following criteria must be observed when installing the unit to ensure easy accessibility for
maintenance and maintenance work (Fig. 9).
A: Minimum distance for servicing the cooling register.

2 .1 .1 Cold water cooling register for AIR1 XC ventilation units

The AIR1 unit must be fully isolated from the mains power supply before all maintenance and installation work
and opening the terminal compartment! The electrical connections must be carried out in accordance with the
following wiring diagrams and must only be carried out by qualified electricians . The electrical connection must
be fully isolated until the final assembly!
1. The cooling register has 4 mounting brackets for installation (see Fig. 10). Suspend the cooling register with these
mounting brackets using the rubber dampers. Before suspension, apply sealing strips where the cooling register is
joined together with the AIR1 unit.
A
H

Type
AIR1-KR KW XH 1000
AIR1-KR KW XH 1500
AIR1-KR KW XH 2500
AIR1-KR KW XH 3500
AIR1-KR KW XH 4500
AIR1-KR KW XH 5500
AIR1-KR KW XH 7000
AIR1-KR KW XH 8500
8
Fig .7
Type A (mm)
AIR1-KR KW XC 500 335
390
AIR1-KR KW XC 700
440
AIR1-KR KW XC 1400
490
AIR1-KR KW XC 2200
AIR1-KR KW XC 3200 590
Fig .8
Type H (mm)
AIR1-KR KW XC 700
AIR1-KR KW XC 1400
Fig .9
A (mm) Type A (mm)
985 AIR1-KR KW RH 1500 960
995 AIR1-KR KW RH 2000 1060
1215 AIR1-KR KW RH 3000 1170
1375 AIR1-KR KW RH 5000 1440
1425 1560
AIR1-KR KW RH 6000
1635 1810
AIR1-KR KW RH 8000
1935 1910
AIR1-KR KW RH 9500
2285 AIR1-KR KW RH 12000 2060
AIR1-KR KW RH 15000 2310
EN
35
40