riptunes CDB-232BT Mode D'emploi page 9

To skip tracks on a CD:
• To skip to the next track, press the NEXT/F.FWD button (11).
• To restart the current track, press the PREV/F.REV button (6)
once.
• To skip to a previous track, press the PREV/F.REV button seve-
ral times until the track you want to hear is shown in the LED
Display (14).
To search tracks on a CD:
• To scan through the current track, press and hold the
NEXT/F.FWD button until you reach the desired portion of the
track.
• To scan backward through the current track, press and hold
the PREV/F.REV button until you reach the desired portion of
the track.
To repeat CD playback:
• Press the REPEAT/PROGRAM button (10) once to repeat a
single track. The REPEAT Indicator Light (16) blinks and the
track will immediately replay.
• Press the REPEAT/PROGRAM button twice to repeat the entire
CD once playback is complete. The REPEAT Indicator Light
turns on steadily.
• Cancel repeat playback by pressing the REPEAT/PROGRAM
button until the REPEAT Indicator Light turns off.
To program the Boombox to play up to 20 tracks of a CD in any
desired order:
1. Stop the CD if it's playing by pressing the STOP button (8).
2. Press the REPEAT/PROGRAM button. The PROGRAM Indicator
Light blinks, and a blinking "01" shows in the Display.
3. Press the NEXT/F.FWD or PREV/F.REV button until the number of
the first track you want to program appears in the Display.
4. Press the REPEAT/PROGRAM button to program the first track.
A blinking "02" shows in the Display.
5. Repeat Steps 3 and 4 for each track you wish to program.
6. When you are done programming tracks, press the PLAY/PAUSE
button to start playing the CD in the order you programmed.
9