Charging Battery - iKarus Storm-III Manuel D'utilisation

Extension Stick Installation (optional use)
Make sure the control stick and
the extension stick are parallel,
then insert them directly into the
tip of each control sticks.
1.
Charge Connector
(from Transmitter)
1. Turn the helicopter OFF and also switch OFF the
transmitter.
2. Take the charge connector out of the transmitter,
then connect it to the helicopter charging plug.
3. Turn the transmitter power ON; the power indicator
light (RED) and charging indicator light (GREEN) will
switch on.
4. Automatic stop as soon as charging is completed,
and the charging indicator light will switch off.
5. Unplug the connector from the helicopter charging
plug.
6. Ready to play.

Charging Battery

2. 2.
3.