INFOSEC UPS SYSTEM E4 LCD Pro 5000 Manuel Utilisateur page 43

MODEL
CAPACITY
INPUT
Low Line Transfer
Low voltage range
Low Line Comeback
High Line Transfer
High voltage range
High Line Comeback
Frequency range
Phase
Power factor
OUTPUT
Voltage
AC voltage regulation
Frequency range (synchronized range)
Frequency range (battery mode)
Current crest ratio
Harmonic distortion
AC mode to battery
Transfer time
mode
Inverter to Bypass
Waveform
EFFICIENCY
AC mode
Battery mode
BATTERIES
Battery type
Standard model Recharging time
Charging current
Battery number
Long-run
model (S)
Charging voltage
DISPLAY
LCD screen
ALARM
Battery mode
Low battery
Overload
Default
Bypass mode
PHYSICAL CHARACTERISTICS
Dimensions HxWxD
Standard model
(mm)
Net Weight (kg)
Dimensions HxWxD
Long-run model (S)
(mm)
Net Weight (kg)
ENVIRONMENT
Humidity
Noise level
* Reduce capacity to 60% of capacity in Frequency converter mode and to 80% when the output voltage is adjusted to 208VAC. **Product
specifications are subject to change without further notice. Low voltage (110V) and High Voltage (220V) models are different products.
MANAGEMENT / COMMUNICATION
RS232 & USB communications ports
Optional SNMP
Software
WARRANTY
Warranty
INFOSEC UPS SYSTEM – 15, Rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr –
E4 LCD Pro 5 000 E4 LCD Pro 6 000
(S)
5000 VA / 4500 W 6000 VA / 5400 W
176 VAC @ 100% load / 110 VAC @ 50% load
186 VAC @ 100% load / 120 VAC @ 50% load
46~54 Hz at 50Hz / 56~64 Hz at 60Hz
46 ~ 54 Hz at 50 Hz / 56 ~ 64 Hz at 60 Hz
≦ 3 % @ 100% Linear Load; ≦ 6 % @ 100% Non-linear Load
> 89%
> 88%
12 V / 9Ah x 16
Default : 1 A ± 10%; Max.: 2A ± 10%
Depending on the capacity of external batteries
Default: 4 A ± 10%; Max.: 6A ± 10%
UPS status, Load level, Battery level, Input/Output voltage, Discharge timer and Fault
369 x 190 x 688
72
369 x 190 x 318
21
<55dB to 1 meter
Supports Windows family, Novell, Linux, Mac and FreeBSD
Power management from SNMP manager and web browser
03 17 AA 59 204 10
E4 LCD Pro 8 000
(S) (S)
8000 VA / 7200 W
300 VAC ±3%
290 VAC
Single phase with ground
≧ 0.99 at 100% load
208-220-230-240 VAC
± 1%
50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz
3:1 max
0 ms
0 ms
Pure Sinewave
9 hours recover to 90% capacity
conditions
Sounding every 4 seconds
Sounding every second
Sounding twice every second
Continuously sounding
Sounding every 10 seconds
<95 % and non-condensing
InfoPower
2 years
E4 LCD Pro 10 000
(S)
10000 VA / 9000 W
> 90%
> 89%
12 V / 9Ah x 20
442x 190 x 688
82
442x 190 x 318
23
<58dB to 1 meter
42