Fault Code; Warning Indicator; Icon Flashing - INFOSEC UPS SYSTEM E4 LCD Pro 5000 Manuel Utilisateur

LCD display
Description
Fault status
LCD display

3-8. Fault Code

Fault
DC Bus start failure
DC Bus over
DC Bus under
DC Bus unbalance
Inverter soft start failure
High Inverter circuit voltage
Low Inverter circuit voltage

3-9. Warning Indicator:

Warning
Battery low
Overload
Battery unconnected
Over charge
EPO enable
Fan failure/Over temperature
Charger failure
I/P fuse broken
INFOSEC UPS SYSTEM – 15, Rue du Moulin – 44880 Sautron – France – www.infosec-ups.com
39 Hot Line Tel : +33 (0)2 40 76 15 82 – fax : +33(0)2 40 94 29 51 – hotline@infosec.fr –
This operation is used to check the battery status.
When a fault occurs, the UPS will display fault messages on the LCD
panel.
Fault code Icon
01 None
02 None
03 None
04 None Inverter relay short-circuited
11 None
12 None
13 None

icon flashing

Icon (flashing)
03 17 AA 59 204 10
Fault
Inverter circuit output short
circuited
Negative power fault
Battery SCR short-circuited
Over temperature
CPU communication failure
Overload
Beeping every second
Beeping twice every second
Beeping every second
Beeping every second
Beeping every second
Beeping every second
Beeping every second
Beeping every second
Fault code Icon
14
1A None
21 None
24 None
41 None
42 None
43
Alarm