CAPTELEC MD2200 - T 2020 Manuel D'utilisation page 59

The cuff may not be applied
ERROR code 3
(E3)
appears
The unit does not measure
ERROR code 4
(E4)
appears
There is a measuring Error
Cuff over inflated
ERROR code 5
(E5)
appears
ERROR code 6 Low battery
(E6)
appears
Circuit locked
The monitor keeps
reinflating
TROUBLESHOOTING
Check whether tube connection of
the cuff is secured to the unit
properly
If you have a very weak or irregular
heart beat, the device may have
difficultly in determining your blood
pressure
Sit comfortably and still. Fasten the
cuff again carefully
The measurement range is over
300 mmHg. It is recommended to
see doctor as soon as possible.
The battery power is too low to
function. Replace the batteries with
new ones.
Remove and reinsert the batteries
and then proceed to take
measurement again.
59