Keys; Flow/Rh - Schiltknecht Messtechnik MiniAir20 Mode D'emploi

MiniAir20
Operating Instructions:

Keys:

The instrument is switched on and off with the "On/Off"
key.
The flow rate or the relative humidity are displayed in the
Flow
instantaneous mode with the "Flow/RH" key.
RH
The temperature of the flow probe or the external
humidity/temperature probe is indicated with the "Temp"
key.
The mean value measurements are initiated or
interrupted with the "Start/Stop" key.
34
Functions:
With Mini2Logger connected and switched on, the
"On / Off" key is used for transferring and saving individual
measurements.
The indication is made via a 2 second mean value which is
recalculated and displayed every 0.5 seconds.
The indication shows m/s or relative humidity (External
humidity probe), depending on the connected probe.
The indication "MEAN" flashes during the mean value
measurement.
It is also possible to define a certain mean value time for the
"Rep" key. With the key sequence "Start/Stop" and "Rep" the
number of seconds for the mean value measurement is
started and counted in the display. On reaching the desired
averaging time, the "Start/Stop" key must be pressed again.
This averaging time now remains saved on the "Rep" key
until either the averaging time is overwritten with a new time
or the instrument is switched off.
Schiltknecht Messtechnik AG