Charging The Battery - Micro Falcon X3 Black Manuel De L'utilisateur

Charging the battery

The following describes the charging process:
Connect the charger to an electrical outlet. The LED display on the charger
●
should now light green.
Now connect the electric scooter to the charger. You can see that the charger
●
and scooter are connected correctly when the LED display on the power supply
unit changes to red (this may take a few seconds).
When the scooter is fully charged, the LED display on the charger changes back
●
to green.
EN
WARNING
Image:
Charging the electric scooter
The installed batteries are rechargeable
lithium-ion batteries. Never charge
batteries that are not intended to be
recharged.
21