Technical Specifications; Simplified Eu Declaration Of Conformity - Urmet 1083/85 Manuel D'installation Et D'utilisation

TECHNICAL SPECIFICATIONS

Supply voltage (*): ............................................................................................................................24 V
Absorption current: ................................................................................................................2 mA Maximum
Absorption current: ...............................................................................................................................15 mA
Maximum distance between Yokis interface and monitor: ...................................................................... 15 m
Terminal strip dimensions: .................................................................... three-core wire 0,75 mm
(*) Use the external PSU supplied with the monitor, whose power supply complies with the limited
power source (LPS) and is protected against short circuit and overcurrent in accordance with the
requirements of standard EN 60950-1:2006 +A11+A1+A12+A2.
Radio range:
Radio transmission:
Radio frequency: ................................................................................................................................. 2,4 GHz
Dimensions (l x h x p) ........................................................................................................... 80 x 80 x 32 mm
Working temperature range: ......................................................................................................... -5 ÷ +45 °C

SIMPLIFIED EU DECLARATION OF CONFORMITY

Hereby, URMET S.p.A. declares that the radio equipment type:
YOKIS INTERFACE FOR MODO 2VOICE Ref. 1083/85
is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
www.urmet.com
DS1083-069B
• inside 100 m² apartments with perpendicular crossing of main wall or ceiling;
• 250 m in open range.
In both cases the range may be reduced by the presence of metallic elements,
crossing of walls or
the transmitter Led lights up only if the radio transmission was successful.
Adding an intermediate receiver will solve the problem of insuffi cient range.
Refer to the Yokis transmitter instruction booklet for more information.
partitions.
single-core wire 1 mm
[AWG18]
2
[AWG17]
2
11