Installation And Connection - DJI RONIN DF01 Guide De L'utilisateur

Overview
1. Status Indicator
2. AF/MF Switch Button
3. USB-C Port
4. 1/4"-20 Thread to Cold Shoe Adapter
5. Thumb Screw
6. Mounting Base
7. Lock Wheel
8. Infrared Distance Sensor (TOF)
9. USB-C Cable

Installation and Connection

Installing on Camera Cold Shoe (Figure A)
1. Remove the 1/4"-20 thread to cold shoe adapter.
2. Install the 3D Focus System on the cold shoe of the camera and rotate the lock
wheel to fix firmly.
3. Use two USB-C cables to connect the 3D Focus System to the USB-C port and
focus motor of the gimbal.
DO NOT directly insert third-party cables or devices into either USB-C ports
of the 3D Focus System. Otherwise, the 3D Focus System or third-party
devices may be damaged by the power supply.
Installing on Camera Cage (Figure B)
1. Use a 1/4"-20 thread to cold shoe adapter to install the 3D Focus System onto the
camera cage and rotate the thumb screw to fix firmly.
2. Use two USB-C cables to connect the 3D Focus System to the USB-C port and
focus motor of the gimbal.
Using the 3D Focus System
A focus motor is required in order to use the 3D Focus System.
4
1
2
3
4
×1
×1
3
8
7
6
5
9