Heating Function - Fritel SB 2390 Mode D'emploi

2. HEATING FUNCTION

Temperature setting:
1. HIGH (high temperature: 100°C)  press the "Heat" button once
Press the "Heat" button once to select the temperature of 100°C.
-
button will blink.
Then press the ON-OFF button to start the program.
-
The requested temperature will be kept at 100°C (+/- 2°C). (the program
-
will adjust itself according to the actual temperature)
The pre-set cooking time is 30 minutes.
-
When the program is finished, a sound signal will sound 4 times.
-
2. MEDIUM (medium temperature: 80°C)  press the "Heat" button twice
Press the "Heat" button twice to select the temperature of 80°C.
-
button will blink.
Then press the ON-OFF button to start the program.
-
The requested temperature will be kept at 80°C (+/- 2°C). (the program
-
will adjust itself according to the actual temperature)
The pre-set cooking time is 30 minutes.
-
When the program is finished, a sound signal will sound 4 times.
-
3. LOW (low temperature: 60°C)  press the "Heat" button 3x
Press the "Heat" button 3x to select the temperature of 60°C. The button
-
will blink.
Then press the ON-OFF button to start the program.
-
The requested temperature will be kept at 60°C (+/- 2°C). (the program
-
will adjust itself according to the actual temperature)
The pre-set cooking time is 30 minutes.
-
When the program is finished, a sound signal will sound 4 times.
-
During the heating process, the preparation can be blended manually if needed.
(See above: Mixer/Blender function)
Liquid preparations can be poured out directly from the jug.
3. SOUP FUNCTION
a) ATTENTION: To avoid the spilling over of the soup, we advise not to pour over
1,7L of cold liquid, or not over 1,4 L of warm liquid into the jug, but never more
than the max indication.
b) Program choice:
1. SMOOTH
- Press the "Smooth" button to prepare a smooth soup.
- Pre-set cooking time for this function is 25 minutes.
23
The
The