4)
Object temperature
Put on the probe cover and the LCD don't display
When powered on, point the device near an object within 1cm, Press down the "Power/Scan" button,
scan it for 2-3 seconds, Then release the "Power/Scan" button, then the device make a sound "beep",
the test is completed.
6.
Battery Replacement
Low battery: When the battery comes to low, the icon of low battery will appear on the bottom of screen
Please replace the battery as soon as possible, however, the thermometer will continue to operate for some
times. (Fig6.1)
No battery:When the battery reaches its lowest level,the battery symbol flashes,the "Lo"display appears and
beep(Fig6.2), then power off automatically.
(Fig 6.1)
Battery replacement
1)
Open the battery cover and take out the old battery(Fig6.3)
2)
Put a new CR2032 button battery with cathode downward into the battery seat.(Fig6.4)
Note:
To deal with the old battery and the whole thermometer,please comply with the local law and regulations.
7.
Precautions
1)
When first use this thermometer, please put the battery into the thermometer.
2)
With a water tight probe, after each use, the thermometer may clean with a disinfectant wipe or cotton
wool soaked in alcohol.
3)
The body of the thermometer is not waterproof,do not immerse it into any liquid.
4)
Do not expose the device to the extreme temperatures for along time .
5)
Avoid violent impacts and do not drop the thermometer.
6)
Avoid direct contact the top of the probe with fingers.
7)
Do not try to diassemble the device.
8)
The device is designed without ear caps,which are not necessary. Keep the probe clean,and protect it
from earwax,sweat and oil stains. Otherwiese,the infrared measurement function will not be accurate
9)
Do not measure body temperature witihin 30 minutes after sports or bath.
10) When the enviroment changes a lot(for example,from indoor tooutdoor),please wait in the new
envionment for about 30 minutes before measuring the new temperature.
11) The intervals should be 10 seconds when measuring body temperature.
8.
Tronble shooting
Description
(Fig 6.2)
The measured body temperature>42.9°C
The measured body temperature< 32.0°C
When measures body temperature, the room temperature is exceed the working
temperature range 10.0°C-40.0°C
, it switch into object measuring mode.
(Fig 6.3)
Meaning
71
(Fig6.4)