Uk User Manual - SBS TEEARSETBT210W Mode D'emploi

UK
USER'S GUIDE
BEFORE USE:
Please read carefully the instructions, learn how to use all the keys and be
sure that the earphone is fully charged.
Charge at least one hour before to use it for the first time using the supplied
USB charger. DO NOT USE THE HEADSET WHILE CHARGING.
POWER - VOLUME CONTROL:
Power on: press the main button key until the blue led flash.
Power off: press the main button key until the red led flash.
Volume +/- : tap once to change the volume key.
Long press to search the previous or the next track.
PAIRING:
1. Press and hold the main button 7 sec. to enter the pairing mode (red and
blue led will flash alternatively).
2. Turn on the Bluetooth on your smartphone in search mode.
3. Select the headset from the search list.
4. If required by the smartphone, prompt the 0000 password.
5. Then you can use the headset to call or listen to music.
PAIRING WITH TWO PHONES:
1. After paired the first phone, turn off the Bluetooth on the headset and on
the first phone.
2. Turn on the Bluetooth on the second phone and on the headset. Pair the
second phone.
3. Once paired with the second phone, turn on the first phone: it will pair
automatically.
4. The Bluetooth headset is now paired with two mobiles and you can answer
the calls from each mobile.
CALLS:
1. Answer a call: press the main button once to answer.
2. Reject a call: press the main button two times to reject.
3. Hang up a call: during a call, press once the main button.
LED INDICATORS - VOICE PROMPT:
• Turn on and pairing: red and blue LEDS flash alternately. Voice prompt
"power on".
• Turn off: red light flash. Voice prompt "power off".
• Incoming call: blue led flash continually
• End call: blue led flash once. Voice prompt "call end".
• Charging: red light has been lit.
4