Daikin EKSRDS2A Manuel D'utilisation page 16

Mounting and commissioning
14
Drill holes (Ø 10 mm) at the position of the two marks and
3.
insert the enclosed dowels. Screw the long hanger bolt in-
to the top hole, the short hanger bolt into the bottom hole.
Fit
4.
with a washer and a nut.
Connect the pipes of the solar circuit to the connections of
5.
the fittings.
Refit the upper insulation.
6.
Fig. 3: Mounting
with the bottom insulation and secure it