Thrustmaster T-Wireless Black PC Manuel De L'utilisateur page 4

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 8
ADVANCED FUNCTIONS
PROGRAMMING BUTTONS / MINI-STICKS / D-PAD
All buttons, directions of the mini-sticks and of the D-Pad can be switched using the MAP button (5).
• Examples of possible applications:
- Switching the functions of buttons
- Switching the 2 mini-sticks (in this case, you must map the 4 directions of the first mini-stick to the 4
directions of the second)
- Switching the D-Pad with a mini-stick (in this case, you must map the 4 directions of the D-Pad to the 4
directions of the mini-stick in question).
• Programming/switching procedure:
Steps
1
2
3
• To return to "default" programming (to erase all of your programming):
Steps
1
2
Please note that your programming also disappears each time the gamepad is disconnected or
TROUBLESHOOTING AND WARNINGS
• My gamepad doesn't function properly or doesn't seem to be properly calibrated:
- Please exit the game, switch off your gamepad and unplug the receiver from your console or PC.
Resume normal game play by plugging the receiver back in, then switch on the gamepad and launch the
game again.
- Never move the mini-sticks when connecting your gamepad (to avoid any calibration problems).
• I can't configure my gamepad:
- In your game's "Options/Controller/Gamepad" menu: select the most appropriate configuration.
- Please refer to you game's user manual or online help for more information.
- You can also use your gamepad's "programming" function to resolve this type of problem.
When you're done using your gamepad, we recommend that you always set your gamepad's
POWER switch (9) to the OFF position (to extend battery life).
Action
Press and release the MAP button (5)
Press and release the button or direction to switch
Press and release the button or direction where you
wish to place the function
The two functions are now switched.
Action
Press and hold the MAP button (5) for 2 seconds
Release the MAP button (5)
Your programming is now erased.
when the gamepad (or console) is in standby or restarts.
3/6
LED (4)
(on
gamepad)
RED
FLASHES
IN RED
GREEN
LED (4)
(on
gamepad)
FLASHES
IN GREEN
GREEN

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

T-wireless black ps3T-wireless black

Table des Matières