How To Pair Two Speakers Into Left And Right Channel - Sailor SA-2000 Manuel D'utilisation

E
NGLISH

How to pair two speakers into left and right channel

How to pair two speakers into left and right channel
First, you have to check the two speakers have been turned off.
1. Press and hold the power button, when you see the blue LED light continue pres-
sing it until it turns green, do the same for the second speaker, press and hold the
power button, when you see the blue LED Iight continue pressing it turns green.
2. When the green LED is blinking it means the 2 speakers are presently pairing, it will
take a couple of seconds (30 SECS) before the light turns blue.
3. When the LED lights blue, press the Mode button under the speaker, you'll hear
"left channel" or "right channel".
4. To enter in pairing mode, press and hold the "Pairing button" of the left channel,
until you see the LED starts to blink.
5. Turn on compatible Bluetooth devices and search. When you find SA-2000
connect to it.
6. Now you can play music on your device, you can turn the volume up/down, play
and pause with your device, or use volume up/down button on the speakers to do
so. The 2 channels are syncronized so you can turn the volume up/down, or turn
off the music with any speakers.
7. To turn off the speakers, press and hold the power button for the LEFT CHANNEL
for 3 to 5 seconds until you hear the indication sound; this means the speaker is
off. If you turn off the right channel first, you'll need to turn off the left channel
separately.
The left and right channels only have to be paired at the first time through the afo-
rementioned procedures. After that, you only have to switch on the two speakers,
and then they can connect to each other automatically.
If you only switch on one speaker, it will become a mono mode stereo speaker.
If you want two speakers to become left and right channel, please follow the afo-
rementioned procedures.
SAILOR
34
®
SA-2000
TWIN USAGE